1.Fastest Cycle Time in its Class.
The Momentum Series is built for efficiency and speed. With its triple track conveyor rails and servo drive motors, for example, the Momentum Elite model provides the greatest throughput capability in the series, making it the ideal printer for high volume, high mix assembly lines.
2.Proven Momentum Series Accuracy and Performance.
3.Benchmark User Interface.
| BOARD HANDLING: | |
| Maximum plate size(X x Y) | 609.6 mm x 508 mm(24”x 20”) |
| Minimum Plate Size (X x Y) | 50.8mm x50.8 mm (2" x 2") |
| Board thickness | 0.2mm(0.008") to 5.0mm (0.20"), up to 6.0mm(0.24 ") without top clamp foils |
| Maximum board weight | 4.5 kg (9.92 lbs) |
| Board Edge Clearance | 3.0 mm (0.118 ") |
| Underside Clearance | 12.7 mm (0.5 ") standard Configurable 25.4 mm(1.0 ") |
| Base Hold-Down | Fixed Top clamps, centernest vacuum, Optional EdgeLoc |
| Board support methods | Magnetic pins Gel-Flex(optional), vacuum pins,support blocks, patented automatic-tooling or Grid-Lok |
| PRINT PARAMETERS: | |
| Maximum print area (X x Y) | 609.6 mm x508 mm (24"x20") |
| Print gap (Snap-off) | 0mm to 6.35mm (0"* to 0.25") |
| Print speed | Up to 305mm/sec (12.0"/ sec) |
| Print Force | 0 to 20kg(0 1b to 44 Ibs) |
| Stencil frame size | 737 mm x 737 mm (29'x29") Adapters available for smaller sizes |
| VISION | |
| Fiducial types | Standard shape fiducials (see SMEMA standards), pad/aperture |
| Camera System | Single digital camera -MPM patented look up/down vision |
| PERFORMANCE | |
| Total System Alignment Accuracy and Repeatability |
±12.5 microns (+0.0005 ")at 6 sigma Cpk is greater than or equal to 2.0* |
| Qualification is performed using production environment process variables; print speed,table lift and camera,movement are included in the capability figure. |
|
| Wet print deposit ±20 microns Accuracy and Repeatability (±0.0008 ") at 6 sigma, Cpk of greater than or equal to 2.0* Based upon actual wet printing with positional accuracy and repeatability verified by a 3rd party measurement system. |
|
| Cycle time Momentum 11-second standard Momentum+ 9-second standard Momentum HiE 7.5-second standard Momentum Elite 6-second standard |
|
| FACILITIES | |
| Power requirements | 200-240 VACT±10% single phase @ 0.50/60Hz.15A |
| Air supply requirements | 100psi:@4 cfm(standard run mode) to 18.cfm(vacuum wipe)(6.89 [email protected] L/s to 8.5L/ s),12.7mm (0.5") diameter line |
| Height (excluding light tower) | 1638.4mm(64.5") at 940mm(37.0 ") transport height |
| Machine Depth | 1593.1mm(62.72 ") |
| Machine Width Momentum ,Momentum+ ,Momentum HiE 1202.7 mm (47.35”) Momentum Elite 1675.5 mm(65.96”) |
|
| Minimum Front clearance | 508 mm(20.0”) |
| Minimum rear clearance | 508 mm(20.0”) |
| Machine weight Momentum ,Momentum+ ,Momentum HiE 862 kg(1900 lbs) Momentum Elite 899 kg(1982 lbs) |
|
| Machine weight with wooden case Momentum ,Momentum+ ,Momentum HiE 1155.5 kg (2547 lbs) Momentum Elite 1192.5 kg (2629 ibs) |
|
| * The higher the Cpk value, the lower the variability with respect to the process specification limits. In a process qualified as a 6 sigma process (i.e.,one that allows plus or minus 6 standard deviations within the specification limits), the Cpk is greater than or equal to 2.0. | |
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
